Configure Mikrotik with VLAN

If you need to configure Mikrotik with VLAN just follow the instructions.

All you need is a Mikrotik router with Router OS.

Connect to Mikrotik with MAC Address and remove default configuration. If Mikrotik disconnect, connect again with MAC.

1.       Go to > Interfaces > VLAN and Create a New VLAN Interface.

Name: vlan-nr_of_VLAN, example vlan-10

VLAN ID: nr_of-VLAN, example 10

Interface: Interface where you want to add this VLAN

Don’t change other options on this page, see picture below.

Just pres OK and Interface VLAN has been created.

If you have only 1 VLAN on an interface that mean you have an interface in access mode, if have 2 or more Interface is on trunk mode.

If you need a LAN between 2 ports of Mikrotik you need to create a bridge-vlan Interface and need to associate Interfaces in this bridge-vlan.

2.       Go to > Bridge > Create New

Name br-vlan-nr_of_VLAN, example br-vlan10

Go to > Ports > Add ports that you want to this bridge-vlan

Interface – Interface that you want to add, include and vlan interface too

Bridge – bridge-vlan Interface

Don’t change other options on this page, see picture below.

If we will add ether1, ether3 and vlan-10 on this bridge that mean we have an isolated LAN between port 1 and port 3 on VLAN 10.

If we and an dhcp-server in Interface vlan-10 with ip 192.168.1.1/24, we will get IP from this range only to port 1 and port 3.

VLAN configuring method will help you to manage your office traffic services more efective and with no devices extra. Just 1 Mikrotik Router and you will have all that you need on your office.

See my video tutorial on this link and all the situation will be more simple for configuring your router. Just follow me step by step and see what to do with your router.